We appreciate your interest in part number 64A7A39-1, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by Bourns Instruments Inc and is listed with the NSN 5905-01-325-1966, as well as the description “Resistor Variable Wire Wound Pre.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number 64A7A39-1. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information With Any Third Parties.
In addition to part number 64A7A39-1, be sure to explore our website further for related items produced by Bourns Instruments Inc under the CAGE Code 57921 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 5905 Resistors and the NSN 5905-01-325-1966. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-325-1966 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 013251966 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NL7233-1447-0 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPC | UNDERCUT WIDTH | 0.0520 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 ALL SECTIONS |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.1 TO 0.1 OHMS ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TAB,SOLDER LUG |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1079.0 MINIMUM AND 1081.0 MAXIMUM |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 500.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | EXTERNAL JUMPER WIRE BETWEEN SECTIONS |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.043 INCHES MAXIMUM |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBME | CUBIC MEASURE | 1.273 CUBIC INCHES |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 MINIMUM AND 1090.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR ALL SECTIONS |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION EQUATION |
| TEST | TEST DATA DOCUMENT | 10001-64A7A39 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.750 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.891 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | WALLEYE MK 64 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
