We appreciate your interest in part number EXL44B, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by Federal Commercial Item Description and is listed with the NSN 3416-00-189-7833, as well as the description “Lathe Engine.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number EXL44B. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information With Any Third Parties.
In addition to part number EXL44B, be sure to explore our website further for related items produced by Federal Commercial Item Description under the CAGE Code 58536 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 3416 Lathes and the NSN 3416-00-189-7833. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 MORSE |
| SR-5 | MANUFACTURERS CODE | 54522 |
| AWHA | BED TYPE | SOLID |
| ELEC | VOLTAGE IN VOLTS | 110.0 AND 220.0 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| ACDC | CURRENT TYPE | AC |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | NONE SPECIFIED |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 0.750 |
| SR-5 | DESIGN CONTROL REFERENCE | EXL44B |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| APGF | DESIGN TYPE | SCREW |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | A-A-59334TYISTBSW10SZ20 |
| ADQR | CENTER TO CENTER DISTANCE | 26.000 INCHES NOMINAL |
| FAAZ | PHASE | THREE |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 224.0 PER INCH |
| SR-1 | MANUFACTURERS CODE | 58536 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| SR-5 | THE MANUFACTURERS DATA | |
| AAXX | MOUNTING TYPE | BENCH |
| BTTB | SPINDLE SPEED RANGE IN RPM | 34.0 TO 690.0 |
| BTTD | RATED SWING | 10.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 6.563 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
