We appreciate your interest in part number LSCP270032-14, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by General Dynamics Land Systems Inc and is listed with the NSN 4720-01-461-9015, as well as the description “Hose Assembly Nonmetallic.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number LSCP270032-14. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information With Any Third Parties.
In addition to part number LSCP270032-14, be sure to explore our website further for related items produced by General Dynamics Land Systems Inc under the CAGE Code 01417 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 4720 Hose and Tubing Flexible and the NSN 4720-01-461-9015. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-461-9015 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014619015 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LSCP270032-14 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.295 INCHES NOMINAL 1ST END |
| ABKV | OUTSIDE DIAMETER | 1.542 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.093 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AFQN | FLANGE LENGTH | 3.190 INCHES NOMINAL 1ST END |
| AGAV | END ITEM IDENTIFICATION | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE |
| AGFF | FLANGE WIDTH | 2.750 INCHES NOMINAL 1ST END |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 16.880 INCHES NOMINAL WORKING |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL, INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
