We appreciate your interest in part number 51037, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by Koehring Cranes Inc and is listed with the NSN 4320-01-307-3855, as well as the description “Motor Hydraulic.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number 51037. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information With Any Third Parties.
In addition to part number 51037, be sure to explore our website further for related items produced by Koehring Cranes Inc under the CAGE Code 81495 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 4320 Power And Hand Pumps and the NSN 4320-01-307-3855. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| MRC | Criteria | Characteristic |
|---|---|---|
| ARQA | SHAFT PROTRUSION LENGTH | 1.690 INCHES NOMINAL |
| ASMM | CONNECTION QUANTITY | 2 AND 1 |
| ABUJ | THREAD SIZE | 0.250-16 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AZFF | BOLT HOLE SPACING | 1.190 IN. BY 2.310 IN. |
| AJLF | HOUSING MATERIAL | STEEL |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGJS | PITCH DIAMETER | 1.137 INCHES MINIMUM AND 1.146 INCHES MAXIMUM |
| AAPL | TORQUE LOAD RATING | 3218.0 INCH-POUNDS |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | SAE-J518B |
| AZFG | MOUNTING BOLT HOLE SPACING | 4.508 IN. BY 4.508 IN. |
| ASAP | SPLINE PITCH | 12/24 |
| APJC | THREAD LOCATION | INTERNAL |
| AAUH | SPLINE MINOR DIAMETER | 1.0497 INCHES MINIMUM AND 1.0627 INCHES MAXIMUM |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AAUJ | SPLINE MAJOR DIAMETER | 1.2243 INCHES MINIMUM AND 1.2293 INCHES MAXIMUM |
| AXFC | CONNECTION DESIGN | FLANGED AND THREADED |
| ABSA | SPLINE QUANTITY | 14 |
| AXFD | BOLT HOLE THREAD SIZE | 0.438-14 |
| AXFH | SPLINE LENGTH | 1.000 INCHES NOMINAL |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ABTB | MOUNTING HOLE DIAMETER | 0.560 INCHES NOMINAL |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 8.080 CUBIC INCHES |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 4000.0 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| AAXX | MOUNTING TYPE | PAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
