We appreciate your interest in part number MS21151-3, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by Military Standards Corp and is listed with the NSN 3110-00-001-4707, as well as the description “Bearing Ball Rod End.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number MS21151-3. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information With Any Third Parties.
In addition to part number MS21151-3, be sure to explore our website further for related items produced by Military Standards Corp under the CAGE Code 96906 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 3110 Bearings Antifriction Unmounted and the NSN 3110-00-001-4707. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-001-4707 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 000014707 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS51151-3 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.5050 INCHES MINIMUM AND 2.5250 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9590 INCHES MINIMUM AND 0.9790 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 1.2820 INCHES MINIMUM AND 1.3440 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3920 INCHES MINIMUM AND 0.4070 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.0210 INCHES MINIMUM AND 2.0410 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | HEAT STABILIZED FOR OPERATION AT 250 DEG FAH |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP 4130 OUTER RING |
| MATT | MATERIAL | STEEL COMP 4130 SHAFT |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM SHAFT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHAFT |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
