We appreciate your interest in part number 1334-MOD, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by Omatech Service Ltd and is listed with the NSN 3416-01-037-2169, as well as the description “Lathe Engine.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number 1334-MOD. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information With Any Third Parties.
In addition to part number 1334-MOD, be sure to explore our website further for related items produced by Omatech Service Ltd under the CAGE Code 0B6Z5 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 3416 Lathes and the NSN 3416-01-037-2169. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| AWHA | Bed Type | SOLID |
| ACDC | Current Type | AC |
| AKSL | Purpose For Which Designed | GENERAL |
| ELEC | Voltage In Volts | 230 |
| FREQ | Frequency In Hertz | 60 |
| BTTF | Actual Swing Over Bed | 13.000 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTZR | Thread Quantity Range | +4.0/+224.0 PER INCH |
| AAXX | Mounting Type | BENCH |
| ADQR | Center To Center Distance | 30.000 INCHES MINIMUM |
| AKYD | Accessory Components And Quantity | 2 CENTER,LATHE NO.3 MORSE TAPER;1 CHUCK,COLLET,SPINDLE NOSE 1/16THRU1-3/8 IN;1 CHUCK,DRILL 1/16THRU1/2,NO.3 MORSE TAPER SHANK;1 CHUCK,4-JAW,IND.10 IN.DIA;1 CHUCK,3-JAW,UNIV.,8 IN.DIA;1 COLLET SET,FLEX RUBBER 1/16THRU 1 IN;1 EA,DOG,LATHE BENT TAIL 1/2,3/4,1,1-1/4,1-1/2,1-3/4;1 DRIVE PLATE 6-1/2 IN.DIA;1 FACEPLATE LG 12 IN.DIA;1 GEAR SET,LATHE METRIC TRANSPOSING;1 HOLDER CUTTING TOOL BORING BAR;1 EA,HOLDER CUTTING TOOL CUT-OFF,LH,RH,STRAIGHT;1 EA,HOLDER,CUTTING TOOL TURNING,LH,RH,STRAIGHT;1 HOLDER THREADING TOOL 60 DEG SHARP V-FORM;1 KNURLING TOOL,SELF-CTR LATHE W/3 PR.KNURLS DIAMOND PATTERN;1 EA,PLUG,COLLET RUBBER 1/8TO3/8,1/2TO5/8,3/4TO7/8,1TO1-1/8 IN;1 EA,REST,FOLLOWER,STEADY LATHE;1 SLEEVE CTR;1 STOP CARRIAGE LATHE MICROMETER,1 TAPER ATTACHMENT LATHE TELESCOPIC |
| APGF | Design Type | SCREW |
| BTTD | Rated Swing | 13.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 7.750 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYQ | Carriage Quantity | 1 |
| BTYW | Gear Change Type | QUICK |
| MRC | Decoded Requirement | Clear Text Reply |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | 0.029444444 |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| BTYR | Carriage Longitudinal Feed Operation Method | POWER |
| BTYS | Carriage Cross Feed Operation Method | POWER |
| AWLX | Electric Motor Quantity | 1 |
| ASHK | Electric Motor Horsepower Rating | 1.25 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
