We appreciate your interest in part number MS21941-4L4, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by Sae International and is listed with the NSN 4730-00-524-7021, as well as the description “Bolt Fluid Passage.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number MS21941-4L4. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information With Any Third Parties.
In addition to part number MS21941-4L4, be sure to explore our website further for related items produced by Sae International under the CAGE Code 0U583 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 4730 Hose Pipe Tube Lubrication and Railing Fittings and the NSN 4730-00-524-7021. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-00-524-7021 Item PartTypeName: BOLT,FLUID PASSAGE | 4730 | 005247021 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21941-4L4 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | BODY WRENCHING |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.187 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.959 INCHES NOMINAL |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | FLARELESS |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACLT | SECOND END STYLE DESIGNATOR | FLARELESS |
| ACMR | SECOND END THREAD CLASS | 3A |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | 0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM |
| ATKZ | FIRST END THREAD LENGTH | 0.956 INCHES NOMINAL |
| ATLF | SECOND END THREAD LENGTH | 0.378 INCHES NOMINAL |
| BBDF | WRENCHING FEATURE STYLE | HEXAGON |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.499 INCHES NOMINAL |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | 0.433 INCHES NOMINAL |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | 0.499 INCHES NOMINAL |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | 0.433 INCHES NOMINAL |
| BBKQ | FIFTH DIAMETER FROM WRENCHING FEATURE | 0.499 INCHES NOMINAL |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.425 INCHES NOMINAL |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 0.726 INCHES NOMINAL |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | 1.354 INCHES NOMINAL |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | 1.666 INCHES NOMINAL |
| BBKX | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER | 2.034 INCHES NOMINAL |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.189 INCHES NOMINAL |
| BBKZ | SECOND RADIAL FLUID HOLE DIAMETER | 0.189 INCHES NOMINAL |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 2.622 INCHES NOMINAL |
| BBLC | DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT | 1.622 INCHES NOMINAL |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 3.162 INCHES NOMINAL |
| BBLF | WRENCHING FEATURE HEIGHT | 0.344 INCHES NOMINAL |
| BGST | PRESSURE RATING | 3000.000 POUNDS PER SQUARE INCH NOMINAL |
| CPHT | SIXTH DIAMETER FROM WRENCHING FEATURE | 0.363 INCHES NOMINAL |
| CPHW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SIXTH DIAMETER | 2.206 INCHES NOMINAL |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNJF |
| CQPR | FIRST END SEAT ANGLE | 12.0 DEGREES NOMINAL |
| CQYM | FIRST END NOMINAL THREAD SIZE | 0.438 INCHES |
| CRCN | SECOND END SEAT ANGLE | 12.0 DEGREES NOMINAL |
| CRNB | SECOND END NOMINAL THREAD SIZE | 0.438 INCHES |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T6,T62 OR T851 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS21941 GOVERNMENT STANDARD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
