We appreciate your interest in part number 330-9, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by Vishay Thin Film Llc and is listed with the NSN 5905-00-978-1009, as well as the description “Resistor Variable Wire Wound Non.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number 330-9. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information With Any Third Parties.
In addition to part number 330-9, be sure to explore our website further for related items produced by Vishay Thin Film Llc under the CAGE Code 02111 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 5905 Resistors and the NSN 5905-00-978-1009. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-978-1009 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 009781009 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 330-9 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 2.000 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.438 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.708 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 10.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEFZ | SHAFT RUNOUT | 0.003 INCHES |
| AEGA | LATERAL RUNOUT | 0.005 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00300 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.004 INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 PERCENT,RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 PERCENT,RATED AMPERES C AND BETTER FINISH |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30/0.30 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/1.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 13499-381-1438-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
